So gift idea for his birthday? Obviously an amigurumi of Peter Pan and Tinkerbell... Anime style! ^^
Part 1: Making Peter Pan
You'd be surprised where I got the the pattern from for the head and body base... From a Cthulhu! Who knew that someone could make an amigurumi of a mythical, blood-thirsty monster cute enough to be a base for a chibi? Minus the facial tentacles of course. Clearly, Rural Rebellion can. ^^
(Click Here)
PETER PAN
*After completing the two feet/legs (ankle frills included), attach them together with 6 stitches
Materials:
Monaco Yarn Shade #21 - Rose (2-4 skeins)
Monaco Yarn Shade #255 - Tomato (6-8 skeins)
Monaco Yarn Shade #12 - Blonde (2 skeins)
Monaco Yarn Shade #13 - Honey (2-4 skeins)
Monaco Yarn Shade #60 - Sugar Cookie (8-10 skeins)
Monaco Yarn Shade #10 - Chiffon (2 skeins)
Monaco Yarn Shade #65 - Cinnamon (1-2 skeins)
Crochet Hook - K10.5 (6.5 mm)
*A K10.5 hook is fairly big so like what I did with Plue, I took two skeins of yarn and crocheted them as one, doubling the amount of yarn I needed. So if you're gonna make this in a smaller size with a smaller hook, just cut the number of skeins in half.
Black beads #12
Red thread
Pink blush
Pink blush
Felt cloth:
- Green
- Light brown
- Green
- Light brown
Fiberfill stuffing
HEAD
Rnd 1: 6sc in mr (6)
Rnd 2: inc around (12)
Rnd 3: 1sc-inc (18)
Rnd 4: 2sc-inc (24)
Rnd 5: 3sc-inc (30)
Rnd 6: 4sc-inc (36)
Rnd 7: 5sc-inc (42)
Rnd 8-14: sc around (42)
Rnd 15: 5sc-dec (36)
Rnd 16; 4sc-dec (30)
Rnd 17: 3sc-dec (24)
Rnd 18: 2sc-dec (18)
Rnd 19: 1sc-dec (12)
FO, weave in ends
*Cut out a tiny triangle on the light brown felt and attach it as nose
*Add the button eyes and embroider the lips using red thread
HAIR
(Cinnamon)
*The bangs measure as wide as the eyes and placed slightly above them
*How you make the bangs is up to you. Mine is stitched to the head to keep it in place at all times
*For the rest of the hair, cut strings of Cinnamon of about half a yard
*Then attach them systematically on the scalp
*You don't need to fill in every hole, just enough to cover the head
*Here's a tutorial to make it easier: Amigurumi Hair Tutorial
*When the hair's all attached and done, pony tail it to the side. Keep in mind that you're gonna put a hat on him so make sure that it's not done too high.
*Use a piece of Rose to tie the hair
HAT
(Honey)
Rnd 1: 6sc in mr (6)
Rnd 2: inc around (12)
Rnd 3: 1sc-inc (18)
Rnd 4: 2sc-inc (24)
Rnd 5: 3sc-inc (30)
Rnd 6: 4sc-inc (36)
Rnd 7: 5sc-inc (42)
Rnd 8: 6sc-inc (48)
Rnd 9-11: sc around (48)
Rnd 12: sl around (48)
FO, weave in ends
*Cut out fern with 3 leaves from green felt and glue on left side of hat
*You have two options on how to attach the hat to the head: Stitch it or glue it on. I glued mine
COLLAR
(Tomato)
26ch
Row 1: sc on 2nd ch form hook, sc across, ch1-turn (25)
Row 2-6: sc across, ch1-turn (25)
FO, leave tail for sewing
FEET/LEGS (2x)
(Rose)
9ch
Rnd 1: sc on 2nd ch from hook, sc around (16)
Rnd 2: 4sc, 2hdc, 4dc, 2hdc, 4sc (16)
Rnd 3: sc around (16)
Rnd 4: 2dec, 8sc, 2dec (12)
Rnd 5: [dec. 6sc, 2 dec] *repeat in reverse for other foot (9)
(Tomato)
Rnd 6: 2sc-inc (12)
Rnd 7: 1sc-inc (18)
Rnd 8-13: sc around (18)
FO, weave in ends
ANKLE FRILLS (2x)
(Tomato)
Sl on posts between Rnd 5 and 6 of feet/leg
[4ch, sl on next 2st from hook, skip 1 post and sl on next post] 4x
FO, weave in ends
*This part is really tricky and I'm confused explaining it myself. But if you have any questions I'll try my best to make it more understandable. ^^
*After completing the two feet/legs (ankle frills included), attach them together with 6 stitches
*Stitch the feet/legs together slightly angled so that it wouldn't look too straight or stiff facing front
*Reconnect yarn and continue rounds from feet/legs to the body
BODY
(Tomato)
Rnd 14: sc around (24)
Rnd 15: 3sc-inc (30)
Rnd 16-19: sc around (30)
Rnd 20: 3sc-dec (24)
Rnd 21: 2sc-dec (18)
Rnd 22: 1sc-dec (12)
FO, leave tail for sewing
*Attach the head first, stitch it to the back loops of the body's opening
*Then attach the collar (make sure its centered) and stitch it to the front loops
*With black yarn, stitch an "x" on the chest just below the collar
ARMS (2x)
Rnd 1: 8sc in mr (8)
Rnd 2: 1sc-inc (12)
Rnd 3-8: sc around (12)
FO, weave in ends
SLEEVES (2x)
(Blonde)
17ch
Row 1: sc on 2nd ch from hook, sc across, ch1-turn (16)
Row 2: inc, 14sc, inc, ch1-turn (18)
Row 3-5: sc across, ch1-turn (18)
FO, leave tail for sewing
*Stitch the sleeve to the front loops of the opening of the arm. Do not cut the excess tail
*Then pinch and stitch the opening closed then attach to body
*Don't forget to close the opening on the sleeve when stitched to the arm
HORN
(Chiffon)
Rnd 1: 4sc in mr (4)
Rnd 2: 1sc-inc (6)
Rnd 3: 2sc-inc (8)
Rnd 4: 3sc-inc (10)
Rnd 5-9: sc around (10)
Rnd 10: sl around (10)
FO, weave in ends
*Stitch the horn to the chain and tie it around
Okay, making her was a toughie. I had to completely redo her after making the first one. For one thing, the pattern I adapted it from was in Spanish, so any further instructions other than the number of rounds and rows were a bit difficult for me to understand. Then there was the issue with the eyes... For some reason, I couldn't decide whether to use beads, felt or yarn to embroider them on her face. Well, since I couldn't make up my mind I tried the trial and error approach and yah... That didn't go so well. -_-
So I ended up with Tinkerbell Prototype 1 and thank heavens, no 2, 3 or 4 came after it. Phew! o_O The Chibi pattern was written by Silvia Usón.
So I ended up with Tinkerbell Prototype 1 and thank heavens, no 2, 3 or 4 came after it. Phew! o_O The Chibi pattern was written by Silvia Usón.
(Click Here)
TINKERBELL
Materials:
Monaco Yarn Shade #232 - Lemonade (2 skeins)
Monaco Yarn Shade #30 - Ballet Slipper (1 skein)
Monaco Yarn Shade #35 - Bubblegum (1 skein)
Crochet Hook - E4 (3.5 mm)
Black felt cloth
Red thread
Fiberfill stuffing
HEAD/BODY
(Lemonade)
Rnd 1: 6sc in mr (6)
Rnd 2: inc around (12)
Rnd 3: 1sc-inc (18)
Rnd 4: 2sc-inc (24)
Rnd 5-8: sc around (24)
Rnd 9: 8sc, 2inc, 4sc, 2inc, 8sc (28)
Rnd 10: 8sc, 4inc, 4sc, 4inc, 8sc (36)
Rnd 11: 8sc, 4dec, 4sc, 4dec, 8 sc (28)
Rnd 12: dec-2sc (21)
Rnd 13: dec-1sc (14)
Rnd 14: [dec-1sc] 4x, dec (9)
Rnd 15: 4sc, dec, 3sc (8)
Rnd 16: sc around (8)
Rnd 17: 1sc-inc (12)
Rnd 18: sc around (12)
Rnd 19: 7sc, 2inc, 3sc (14)
Rnd 20-21: sc around (14)
Rnd 22: 8sc, inc, 1sc, inc, 3sc (16)
Rnd 23: sc around (16)
Rnd 24: 1sc, inc, 1sc, inc, 12sc (18)
Rnd 25: dec-1sc (12)
Rnd 26: dec around (6)
FO, weave in ends
*Cut out eyes with lashes on black felt and glue to head
*With red thread, stitch her lips
HAIR
*Cut out strands of Bubblegum about 5 inches long
*Attach hair on head and make sure that it evenly frames the face
*Just look into the hair tutorial again if it gets difficult
*The anime version of Tinkerbell has short spiky hair so cut the yarns in length. Make it short but just long enough to style.
*With white glue, keep the spiky hairstyle in place
*Make sure to let it dry in a clean container or else dirt will still stick to it. Also, make sure to keep it in a place where the hair can't be touched otherwise it'd be ruined
SKIRT FRILLS (6x)
4ch
Row 1: sc on 2nd ch from hook, sc across, ch1-turn (3)
Row 2: dec, 1sc, ch1-turn (2)
Row 3: sc across, ch1-turn (2)
Row 4: dec (1)
FO, weave in ends
*When all 6 frills are done, sc them together and stitch between Rnd 24 and 25 of the body
ARMS (2x)
(Lemonade)
Rnd 1: 4sc in mr (4)
Rnd 2: 3sc, inc (5)
Rnd 3: 4sc, inc (6)
Rnd 4: 5sc, inc (7)
Rnd 5-6: sc around (7)
Rnd 7: 3dec, 1sc (4)
FO, leave tail for sewing
LEGS (2x)
(Lemonade)
Rnd 1: 4sc in mr (4)
Rnd 2: 3sc, inc (5)
Rnd 3: 4sc, inc (6)
Rnd 4: 5sc, inc (7)
Rnd 5: 6sc, inc (8)
Rnd 6: 7sc, inc (9)
Rnd 7: sc around (9)
Rnd 8: 4dec, 1sc (5)
FO, leave tail for sewing
For the wings, I used the Margarita doll pattern by Mia Zamora Johnson.
(Click Here)
Instead of making 4 wings with the same size, I opted to make two smaller sub wings.
SUB WINGS (2x)
SUB WINGS (2x)
Rnd 1: 4sc in mr (4)
Rnd 2: 1sc-inc (6)
Rnd 3: 2sc-inc (8)
Rnd 4: 2sc-dec (6)
Rnd 5: 1sc-dec (4)
FO, leave tail for sewing
*Sitch the main wing on top of the sub wing
*It should look like this:
*Attach the wings on the back
*Make sure there's a little space between them when stitched so that it wouldn't look like a clustered lump
Part 3: Happy Birthday! ^^
*It should look like this:
*Make sure there's a little space between them when stitched so that it wouldn't look like a clustered lump
Amidst my mishap with Tinkerbell, I accomplished this project in less than a month and just in time for my brother's birthday. ^^
So when I surprised my brother with the two amigurumi dolls... His face just went completely... Blank. As in no reaction at all. o_O Speechless and in awe perhaps? Hmm? Hahaha! Well, whatever that meant, I had a good feeling he liked it... My niece certainly did though. ^^
Copyright: Peter Pan is an original pattern written by Duchess Gala with adaptation from Rural Rebellion's Cthulhu pattern. You may do whatever you want with the finished product but please do not sell or claim the pattern as your own. Also, do not post the pattern directly to your website. Just link it to this blog. ^^
Disclaimer: Some of the images are not mine and can be searched online
No comments:
Post a Comment